Español
1. The premise for a gear oil replenishment pump to supply oil to mechanical equipment is to ensure that the specifications of the selected oil accurately match the equipment requirements, including key indicators such as oil viscosity, flash point, pour point, wear resistance, and oxidation resistance. Different mechanical equipment has different performance requirements for oil products due to their different working environments, workloads, and component materials. When selecting oil products, it is necessary to strictly refer to the oil recommendation table provided by the equipment manufacturer to ensure that the oil products can not only meet the lubrication needs of the equipment, but also avoid problems such as component wear and leakage caused by oil incompatibility.
2. As the core of the oil supply system, the gear oil replenishment pump must have stable pumping capacity and precise flow control capabilities, which requires a reasonable pump body structure design, smooth and impact-free gear transmission, and good sealing performance to ensure that during long-term operation, the oil products can be continuously and stably delivered to various lubrication points of the mechanical equipment. According to the actual needs of the mechanical equipment, the gear pump also needs to have the function of adjusting the flow rate to cope with changes in oil demand under different working conditions.
3. Impurities and contaminants in oil products are one of the important reasons for wear, blockage and other faults of mechanical equipment parts. In the process of supplying oil to mechanical equipment, the gear pump must be equipped with an efficient filtering and cleaning system, including setting a coarse filter and a fine filter before the oil enters the pump body to remove large and small particles in the oil; during the oil circulation process, the filter element must be checked and replaced regularly to maintain the cleanliness of the oil.
4. The temperature of the oil also has an important influence on its lubrication performance and pumping efficiency. Too high oil temperature will lead to a decrease in oil viscosity and a decrease in lubrication performance; while too low oil temperature will lead to an increase in oil viscosity and affect pumping efficiency. In the process of supplying oil to mechanical equipment, the gear oil pump must reasonably control the oil temperature, which is usually achieved through auxiliary equipment such as oil coolers and heaters to ensure that the oil temperature is always kept within the range recommended by the equipment manufacturer.
5. In order to ensure that the gear oil pump can supply oil to mechanical equipment stably for a long time, a complete monitoring and maintenance mechanism must be established. This includes regular inspection of the pump's operating status, key parameters such as oil quality and flow rate, timely cleaning and replacement of filter elements, regular inspection and adjustment of pump sealing performance, etc. Professional training is also required for operators to improve their understanding and maintenance capabilities of the gear oil pump and the entire oil supply system.
